7
Assembly / Operating Instructions
Assembling plastic components
1. Place the three storage containers into
position on the upper rails of the side
frames, creating a shelf in the centre
of the unit.
2. Place the left component of the side
tray into position, then place the right
component ensuring it clips into the
left component as shown. Ensure the
side tray rests against the bar on the
top frame.
3. Place bathtub into position as shown
Change pad operation
1. To lower change pad, lift using
handle tab on the front, and push
backwards behind change centre.
2. To raise change pad, lift using
handle tab on the front, and pull
upwards into position.
3. Always ensure, that when using change pad the two safety
straps are secured to the press studs on each end panel.
1.
1.
2.
2.
3.
3.
