12
3.1 Display Configuration
The
Settings
properties let you configure the thin client's display screen. Invoke this properties
sheet by clicking on the
Settings
tab in the
Display Properties
dialog box. The following figure shows
the properties sheet. You can also
Apply
your display after selecting screen resolution and color
quality, the new testing mode will appear. The graphics adapter will be set to the new mode temporarily
(5 seconds) so you can determine whether your display works properly.
3.1.1 DVI function
Click “
Advanced
” and you will see the figure as below by clicking “
S3Display
” tab.
And you will find the two display devices “CRT” and “DVI”. If you don’t connect to a LCD panel with DVI
cable,
the check box with DVI is grayed.
