Dishlex DX 203 User Manual Download Page 7

1

Arrange the items to let
water touch all surfaces.

2

For longer items, fold the
cup racks up.

Prevent to put plates in the first three sectors in
the front part of the basket. Make sure the plates

tilt forward.

Adjustment of the height of the upper basket

If you put large plates in the lower basket, first move
the upper basket to a upper position.

Warning!

  Adjust the height before you load the

upper basket.

Maximum height of the dishes in :
 

upper basket

lower basket

Upper position

20 cm

31 cm

Maximum height of the dishes in :
 

upper basket

lower basket

Lower position

24 cm

27 cm

1

2

Follow these steps to move the upper basket to the
upper or lower position:
1. Move the front runner stops (A) out.
2. Pull the basket out.
3. Put the basket in the upper or lower position.
4. Replace the front runner stops (A) in their initial

position.

Caution!

  If the basket is in the upper position,

do not put cups on the cup racks.

Use of detergent

Only use detergents (powder, liquid or tablet) that
are suitable for dishwashers.

Follow the data on the packaging:
• dosage recommended by the manufacturer,
• storage recommendations.

Do not use more than the correct quantity of de-
tergent to decrease pollution.

1

2

 

7

Summary of Contents for DX 203





















Reviews: