Manual Scanning - Blind Scan
11
Blind Scan:
Allows scanning without entering frequency or symbol rates.
Allows you to specify what frequency range to scan in. Also to
select polarity, or to scan FTA or scrambled channels.
Pressing the Blue button will take you into the LNB setup
menu and allow you to adjust LNB settings.
Before scanning, LNB frequency, DiSEqC and positioner
details, if used, need to be set for each satellite. Refer to
the screenshot shown on the left as an example. Press OK
once correct settings are completed. You will be returned
to the Blind Scan page.
From here you can now Blind Scan by pressing OK.