DISH Tailgater VQ4400, User Manual

Page: 8 / 32

Page 6
1. Point your receiver’s remote at the front of
the receiver and press SAT .
Press RECORD .
When a number appears in the box,
verify “Continue” is highlighted.
Press SELECT on your remote.
The Portable Antenna Setup screen
will display.
IF YOU ARE USING A NEW RECEIVER WITH THE DISH TAILGATER, YOU MUST
FOLLOW THE FIRST TIME SETUP PROCEDURE STARTING BELOW.
AFTER THIS FIRST TIME PROCEDURE, YOU CAN USE “STANDARD DISH
TAILGATER OPERATION” STARTING ON PAGE 10.
DISH TAILGATER OPERATION
FIRST TIME DISH TAILGATER OPERATION WITH NEW RECEIVER
MAKE SURE TO INSTALL THE BATTERIES IN THE RECEIVER’S REMOTE
CONTROL (INCLUDED WITH REMOTE CONTROL).
Images shown may vary by receiver model.