Dish Network Solo 301, User Manual, Page: 51 / 106

Page 46
Chapter 3
Using the System
U
NLOCKING THE
R
ECEIVER
If you unlock the receiver, leave the locks unchanged and then lock the
receiver again, the same locks will be in effect as before.
1. Press the MENU button to display the
Main Menu
.
2. Select the
Locks
option.
3. With the receiver locked, you must enter the password using
the
NUMBER PAD
buttons. The receiver displays stars (*) as you enter
the digits of the password. As soon as you enter the fourth digit of the
password, the receiver highlights the
OK option.
4. Press the
SELECT
button.
5. Select the Unlock System option .
Note : If this option appears as Lock System instead, the
receiver is already unlocked.
L
OCKING THE
R
ECEIVER
F
RONT
P
ANEL
C
ONTROL
B
UTTONS
This keeps anyone from changing the channel using the front panel buttons,
but it does
not lock the remote control buttons.
To lock the receiver front panel buttons, do the following:
1. Press the
MENU
button.
2. Select the Locks option.
If the receiver is locked, enter the password using the
number pad buttons. The receiver displays stars (*) as you
enter the digits of the password. As soon as you enter the
fourth digit of the password, the receiver highlights the
OK
option.
Press the
SELECT
button.
3. Select the
Front Panel Lock
option.
4. Select the
Yes
option.
5. If the receiver is not locked, you must lock it to put the lock you just
created into effect.