background image

DISH Pro & DISH Pro Plus Installation Considerations

Rev. 03/28/05

LNBFs AND SWITCHES

• 

DISH Pro LNBFs work with DISH Pro Plus switches. The DISH Pro Plus Twin functions the same as a 

DISH Pro Twin LNBF when connected to any DISH Pro Plus switch.

• 

Legacy LNBFs and switches can not be used with DISH Pro or DISH Pro Plus LNBFs and switches.

• 

The maximum recommended cable length is 200 feet from the LNBFs to the furthest DISH Pro or 

DISH Pro Plus receiver (150 feet for Legacy receivers).

• 

When mounting switches, position according to instructions on the label.

• 

Use drip loops to direct water away from F-connectors.

LEGACY RECEIVER INSTALLATIONS

• 

The DISH Pro Adapter must be used to connect any Legacy satellite receivers to a DISH Pro LNBF or 

Switch.

Legacy Receivers include:

 

Models 1000, 2000, 3000, 4000, 5000

    Models 2700/2800/3700, 3800/3900, 4700/4900, 6000 (SuperDISH compatible)

 

DISHPlayer Models 7100, 7200

 

All OEM-equivalent models (e.g. RCA, JVC, Phillips)

• 

The DISH Pro Adapter is NOT needed when a Legacy receiver is directly connected to a

DISH Pro Plus LNBF or Switch.

DISH PRO PLUS (DP PLUS) RECEIVERS

DP Plus receivers can be connected with a single cable to DP Plus switches or LNBFs when used with a 
DP Plus Separator. 

See the “Receiver LNBF/Switch Compatibility Chart” for details.

SINGLE-CABLE, DUAL-TUNER INSTALLATIONS

• 

Three DISH Pro Plus components must be connected together for this type of installation:

DISH Pro Plus LNBF or Switch

DISH Pro Plus Separator

DISH Pro Plus (dual-tuner) receiver

• 

Two single-tuner receivers 

cannot

 be connected to a DP Plus Separator – they are not DISH Pro Plus 

receivers.

INSTALLATION MATERIALS

Materials used in a DISH Pro or DISH Pro Plus installation must be rated to 2150 MHz and pass 
DiSEqC 22 KHz tone. These materials include:

• 

RG-6 cable                                       

•     

Line amps

• 

Ground blocks                                  

•     

Barrel connectors

• 

Diplexers                                          

•     

Wall plates

• 

Splitters                                            

•     

Surge protectors

 

DISH Network Retailers, please refer to the latest “DISH Pro Approved Accessories List” located on the 
Retailer Care Site.
 

 

FOR MORE INFORMATION (available on the Retailer Care Site):

• 

“Quick Facts” and “Installation Considerations” documents for:

DISH Pro Plus Technology

DISH Pro Plus 44 Switch

DISH Pro Plus Twin

DISH Pro Plus Separator

Single-Cable, Dual-Tuner Installations

• 

Installation Guides

• 

Distribution Diagrams

Copyright © 2005 EchoStar Technologies Corporation, Englewood, Colorado 80112. All rights reserved.

Reviews: