FAQ PUFFiT-X
FAQ copy for PUFFiT-X
HOW DO I CLEAN MY PUFFIT-X?
The PUFFiT-
X™ can be cleaned in the same way as the PUFFiT™ original model.
The fan is not in the vapor path and will not be damaged by the cleaning. Please
follow the cleaning procedure outlined here:
http://www.youtube.com/watch?v=v4bLamOBvsk
Please make sure you leave the unit to dry for a couple of hours before using it.
HOW DO I CHARGE MY PUFFiT-
X™ VAPORIZER AND HOW LONG DOES IT
TAKE?
Simply plug your PUFFiT-
X™ vaporizer in using the supplied wall charger. Standard
charging time will be 1 Hour* rapid charge using included AC adapter (*80% charge
in 1 hour, followed by 30-40 min trickle charge). It will not harm the battery to charge
it before a low battery warning! When in doubt… plug it in!
HOW MANY USES WILL I GET BETWEEN CHARGES?
Total uses vary with temperature settings and blend but you should get between 25-30
cycles on a full charge. Do not attempt to use your PUFFiT-
X™ vaporizer while
charging. Always remove the charging cable before starting a vaporizer cycle.
WHAT DO THE SETTINGS 1-8 MEAN?
This is the temperature setting. Temperature ranges from 120°C (250°F) to 220°C
(430°F) refer to the instruction manual for more information.
MY PUFFiT-
X™ VAPORIZER LIGHT IS FLASHING. WHAT DOES IT MEAN?
The flashing LED tells you what your PUFFiT-
X™ vaporizer is doing. The LED
indicates low battery, heating, cooling, charging etc. Refer to the instruction
manual for a complete explanation.
IS IT NORMAL FOR THE ALUMINUM CAP OVER THE HEAT CHAMBER TO
HEAT UP?
Yes. The aluminum cap will get hot with prolonged use. A silicone heat guard is
provided to reduce the potential to overheat tender fingers but when in doubt, replace
the mouth cap and allow the PUFFiT-
X™ vaporizer to cool!
HOW DO I FILL THE HERB CHAMBER?
Simply remove the aluminum top cap (gently twist and lift, DO NOT force it) and
lightly pack your favourite blend into the chamber. The best results are achieved with
dry, finely ground blend. Never put liquids, gels or concentrates in your PUFFiT-
X™
vaporizer.
HOW DO I CLEAN MY PUFFiT-
X™?
A cotton swab with a little rubbing (isopropyl) alcohol works very well. DO NOT
submerge the PUFFiT-
X™ vaporizer or place it under running water. NEVER use a
knife or other hard sharp object as it can damage the heating chamber. We have
created a video that walks you through the process step by step.