1
LISTEN TO THE RADIO
1. Set the Power Source Selector to "BATT." or "DYN." position
to turn the unit on.
2. Set the Band Switch to select AM/FM/SW band.
3. Rotate the tuning Knob to select the desired radio station,
the tuning LED will light if the station is properly tuned.
4. Adjust Volume Knob to obtain the desired sound level.
5. To tune the radio off, set the Power Source Selector to
“OFF” position.
HINTS FOR BEST RECEPTION:
-The AM antenna is located inside the cabinet of the unit. If AM reception is weak,
change the position of unit until the internal antenna picks up the strongest signal.
-To insure maximum SW/FM tuner reception, the Telescopic Antenna should be
fully extended and rotated to obtain the best possible station reception.
LISTEN TO WEATHER CHANNEL
1. Set the Power Source Selector to "BATT." or "DYN."
position to turn the unit on.
2. Set the Band Switch to "WX" position.
3. Set the Weather Channel Switch to select your local weather
broadcasting.
4. Adjust Volume Knob to obtain the desired sound level.
5. To tune the radio off, set the Power Source Selector to
“OFF” position.
Weather Band Channel Frequency Table
1
162.400
CH2
162.425
CH3
162.450
CH4
162.475
CH5
162.500
CH6
162.525
CH7
162.550
CHANNEL
FREQUENCY(MHZ)
CH1
1
7
Summary of Contents for D103X
Page 1: ...SELF POWERED AM FM SW NOAA WEATHER RADIO D103X ...
Page 14: ...V080811 ...