Printed in USA
©2004
Page 2
E-2ECGC-PL-0104
READ AND UNDERSTAND THE OPERATORS INSTRUCTION MANUAL THOROUGHLY BEFORE ATTEMPTING
TO OPERATE THIS EQUIPMENT. Death or serious injury could occur if this machine is used improperly.
SAFETY
MESSAGES
The safety instructions are proceeded by a graphic alert message of
DANGER, WARNING, or CAUTION.
Indicates an imminent hazard which, if not avoided,
will result in death or serious injury.
Indicates an imminent hazard which, if not avoided,
can result in death or serious injury.
Indicates hazards which, if not avoided, could result
in serious injury and or damage to the equipment.
GASOLINE
Powered Equipment
• Do not operate gasoline powered equipment without adequate ven-
tilation. Carbon monoxide is an invisible, odorless gas that can kill.
ELECTRICAL
Powered Equipment
• ELECTRICAL HAZARD
- Be sure equipment is properly grounded.
Failure to comply could kill or result in serious injury.
The engine exhaust from this product contains chemicals known to
the State of California to cause cancer, birth defects or other reproduc-
tive harm.
!!!!!
GENERAL INSTRUCTIONS
• You must read and understand the operators instruction manual and
all other manuals associated with this machine. For your safety
and the safety of others around you, it is extremely important to fully
understand how to operate this machine in the way it was intended.
Different model machines or older/newer versions of the same model
may have different parts and controls that you need to understand.
If instructions are not readable or available DO NOT USE this
machine and contact
Discount-equipment
for a replacement
Manual.
• You must be able to physically handle the bulk weight and power of
this machine. If not properly controlled this machine can cause
death or serious injury.
• Do not operate this machine in an impaired mental state. You must
be able to exercise good judgement and reactions to maintain a safe
working environment.
• This is a “one person” machine which means only one operator can
be operating the machine at any one time. For the safety of others,
maintain a safe operating distance to other personnel. Your work
area should be defined and appropriately marked so bystanders
and coworkers do not stand or walk near this machine and end up
seriously injured by flying debris or exposing them to harmful noise
or dust.
• This equipment is for Commercial use. Although this is a “one
person” machine your work team should understand how to shut
this machine off and quickly get medical help if an accident strikes
the operator.
• Keep all guards in place during operation. The guards are to pro-
vide protection from inadvertent contact with dangerous moving
parts, pinch points, or hot surfaces.
• Wear appropriate Personal Protective Equipment (PPE) including
safety glasses, safety boots, work gloves, respiratory protection,
!!!!!
hearing protection, and head protection. Do not wear loose clothing
that can get tangled in moving parts. Failure to do so could result in
dismemberment or death.
Wear an approved respirator when re-
moving hazardous materials or when grinding/cutting dry materials.
Some dust particles such as concrete dust can contain silicate
particles which can cause silicosis (a very serious lung disease).
Contact NIOSH or OSHA for further details. When wet grinding/
cutting, avoid contact with the concrete/asphalt slurry which can
cause serious skin irritations.
• You must maintain this machine per the maintenance schedule in
the operator manual. Remember before adjusting, servicing, or
fueling this machine, disconnect the source of power to the machine
by disconnecting the spark plug (Gas models), or by unplugging the
electrical power cord (electric models) or air hose (Pneumatic
models) AT THE MACHINE so you can assure yourself it remains
unplugged while you are working on it. Do not modify this machine.
Use only genuine EDCO parts and accessories. Repairs and ser-
vice should be performed by approved EDCO dealers or authorized
technicians.
• You should look carefully around the area before you begin work so
you can identify potential hazards such as deck inserts, pipes,
columns, openings, electrical cords or outlets, or any other objects
protruding from the slab surface.
• This machine has no brain so you must use your own. There is no
substitute for safety. The safety decals on the machine are to serve
as a reminder for information you must already know before you
begin using this machine. Take a moment to reread the safety
decals each time you use the machine. If your machine is missing
any decals, contact the
Discount-equipment
.
Go
to
Discount-Equipment.com
to
order
your
parts
