6.
Connect one of two supplied audio cables (8-pin
DIN to RCA
OR 8-pin
DIN to 3.5mm
) to Module. (See
Fig. 6
)
Fig. 6
8-pin DIN input
7.
Route 3.5mm plug toward the dash or location where audio device will
reside (within 6 ft.)
Test Operation:
1.
Turn Radio “ON”
2.
Press “
TAPE/AUX
”
OR
“
CD/AUX
”
button on radio to enter AUX Mode
3.
Connect audio device to 3.5mm plug on 6 ft. Audio cable (See
Fig. 6
) or
RCA jacks.
Fig. 6
3.5mm plug
4.
Search audio device for a test tack and press play. Music from Audio
device will play on car speakers.
5.
Use radio volume control button to set playback level. To reduce
distortion, we recommended setting audio device volume level to 80%
or less.
Warning!
Playlist and Track selection is *NOT* possible from the
GM radio. You must use the audio devices built-in controls to access
audio files.
**
External or remote CD Changer refers to the optional Changer installed on the lower dash,
center armrest, hatch, trunk etc. (external CD Changer is not the Changer built-into the head
unit)
Disclaimer
• This product has no affiliation with
GM
• We’re not liable for misuse of this product.
•We recommend professional installation.
© 1995-Apr-19 Discount Car Stereo, Inc. All rights reserved. Information in this document is
subject to change without notice. Other products and companies referred to herein are
trademarks or registered trademarks of their respective companies or mark holders.
