PRODUCT SAFETY & DISCLAIMER
READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING, FAILURE TO DO SO MAY CAUSE
PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY
•
This installation guide is provided as a GENERAL installation guide, some vehicles vary and
may require additional steps. We do not accept responsibility for third party labor charges
or modifications. Exercise due-diligence when installing this product.
•
We do not accept any responsibility for vehicle damage or personal injury resulting from
the installation of this product.
•
Careless installation and operation can result in equipment damage
.
•
Careless installation and operation can result in equipment damage
.
Requirements:
Radio with cd changer controls
Introduction
Many Jaguar owners looking for a simple way to connect Apple iPods will be
pleased to know the iP-JAG97 adapter does exactly that. The iP-JAG97 adapter
provides a 30-pin dock connector for charging and playback from any Apple
30-
pin iPod and iPhone
. This adapter connects directly to the CD changer port at
the radio and replaces CD changer (if present). To retain CD changer playback
or for a Bluetooth wireless solution, see our
See Frequently Asked question
at the end of this guide for more details.
Installation
Warning
:
The IP-JAG97 connects to radio and replaces CD changer (if
present)
1.
Gain access to the back of the radio. If you have never done this before,
please click
for video dash removal guide which will aid you through
this process:
https://www.youtube.com/watch?v=vpAIdr6V3iE
2.
Locate CD port on radio (if prewired, disconnect cable from radio)
3.
Connect
adapter’s
8-pin plug to
“CD”
port on radio. (See
Fig. 1
)
Fig. 1
CD Port
4.
Connect 8-pin min-din plug from dock connector to the 8-pin mini-DIN
connector on module (See
Fig. 3
) and route 30-pin dock (See
Fig.2
) to
desired location on dashboard, glove box, console etc. Use caution to
not cut, pinch or crimp the cable during this step.
Fig. 2
30-pin dock connector
