Fig. 4
3.5mm jack
Operation
1.
Turn ignition and r
adio “ON”
2.
Press "CD"
or “CD/TAPE”
button on radio (See
Fig. 3
)
Fig. 3
Changer mode
Note
: If radio does not switch to CD, cycle ignition OFF/ON and try again.
3.
Put audio device in play mode. If playback is distorted, lower volume
audio device or if inaudible, raise volume.
Warning:
Playlist and Track selection *NOT* possible from radio.
Use smartphone built-in controls o remote to access and control
audio files and applications
4.
If correct operation is confirmed go ahead and reinstall radio.
Frequent ask questions
1.
Does the HON98-AUX work on all Honda radios?
NO;
the HON98-AUX works on select 1998-05 Honda & Acura CD Changer
controlling radios (Must have 14-pin port
—
See
Fig. 2
).
2.
My radio has a built-in 6 CD Changer, will the HON98-AUX work?
Honda 6-CD Changer radios
1TA1, 1TA2, 1TN0, 1TN1, 1TN2, 1TA1, 1TJ2, 1TJ3
are not supported, however most Acura 6-CD Changer radios are
supported. Please verify radio has 14-pin port (See
Fig.2
)
3.
Can I use the radio buttons to control audio device
NO
; the HON98-AUX does not control audio device. Use device built-in
controls to browse music library.
4.
Will I be able to make phone calls using this device
NO
; but if in speakerphone mode, you will be able to hear caller on the car
speakers.
5.
What happens if phone rings while playing music?
The phone will mute audio playback and resume as soon as call ends.
6.
My vehicle has a slave CD player, will the HON98-AUX Work?
The HON98-AUX replaces the slave CD player.
7.
My vehicle has a slave Cassette player, will the HON98-AUX Work?
YES. The HON98-AUX does not replace the slave CD player.
Email [email protected]
©1995-17 Discount Car Stereo, Inc. All rights reserved. Information in this document is subject
to change without notice. Other products and companies referred to herein are trademarks or
registered trademarks of their respective companies or mark holders.
