Fig. 5
22-pin Molex connector
5.
On module, turn dip switches
# 2 and # 8
“ON” or down. All others
remain
“OFF” or Up (See
Fig. 6)
Fig. 6
dip-switches
6.
Connect included 8-pin DIN to RCA OR 8-pin DIN to 3.5mm cable (See
Fig. 7
) to module 8-pin DIN connector (See
Fig. 8
)
Fig. 7
Aux cable
Fig. 8
Module 8-pin DIN
7.
Route audio cable 3.5mm plug (See
Fig. 7
) to dash area or location of
choice where audio device will reside (within 6 ft.)
Test Operation:
1.
Turn r
adio “ON”
2.
Press “
CD
”
button on radio to enter CD changer Mode.
Note: If radio has built-in CD player and has a disc loaded, the CD
button on radio must be pressed twice (once to activate internal CD,
and again to active external CD)
3.
Connect audio cable to devices jack (headphone) and place device in
playback mode
4.
Use radio volume control to set playback level
Warning!
This Auxiliary input adapters are for audio playback only.
Track selection, display *NOT* possible from Ford radio. You must
use audio devices built-in controls to access music files and radio
volume knob to adjust playback.
