3.
Connect installation 22-pin Molex plug to 22-pin Molex connector on
module (See
Fig. 5
)
Fig. 5
22-pin Molex connector
4.
Set dip switches
# 2 & # 8 t
o “ON”. All others
remain
“OFF” or Up
Fig. 6
dip-switches
5.
Tap/splice installation harness red wire (See
Fig. 7
) to an accessory
supply in vehicle.
Fig. 7
6.
Secure module and proceed to next section
Pairing:
Pairing process varies between devices but basic steps are the same. This
process is done upon initial install and will not have to be repeated:
1.
Turn Ignition and radio
“ON”
2.
On A2DP device: go to
Settings, Wireless & Networks, Bluetooth
Settings
3.
Select
Bluetooth
and turn on.
4.
Select Bluetooth settings
5.
Tap
Scan for devices
.
6.
Wait for Bluetooth device name to appear and select it.
LED inside module will glow steady when paired
Test Operation:
1.
Turn radio and stereo
“ON”
2.
Press “
CD
” button
(press twice if there is a disc in CD slot)
3.
Launch streaming application.
4.
Use stereo volume control button to set playback level.
Warning!
Playlist and Track selection is *NOT* possible from the
stereo. Use audio device built-in controls to access and control the
audio files.
5.
If correct operation is confirmed go ahead and reinstall radio.
