4.
Remove the (4) 10mm screws securing radio to the dash (See
Fig. 3
)
Fig. 3
5.
Pull radio forward to reveal the connectors (See
Fig. 4
)
Fig. 4
Radio connectors
6.
Disconnect factory 8-pin
GRAY
plug from radio (See
Fig. 4
) and
connect to 8-pin BLACK plug on harness (See
Fig. 5
)
Fig. 5
7.
Connect harness 8-pin
BLACK
plug (See
Fig. 6
) to radio chamber vacated
in step 6.
Warning:
Module is wired to receive 12V from radio amplifier turn on lead
(PIN 2-gray plug); however, radio may not provide enough current to
power both the module and Bose amplifier and as a result the module will
work intermittently in which case module must be powered elsewhere
Disconnect terminal
(1)
and
(2).
Connect
(2)
and
(3)
. (
(1)
is
not used).
Route and connect
(3)
to 12V accessory supply in vehicle. Accessory power
available
under steering column inside driver's lower-dash kick panel. Panel
is supported by three bottom screws and three metal/plastic clips at the
top. Brown wire coming off ignition harness
provides ACC power.
Fig. 6
harness
