Fig. 4
Factory plug
4.
Connect antenna terminal marked “TO RADIO” (See
Fig. 4
) to vacated antenna
socket on radio.
5.
By default, the modulator tuning frequency is set to 87.9MHz. If for any reason
you need to change to 88.3MHz; locate module Frequency switch (top left), insert
small screwdriver etc. and move switch to frequency mark seen in
Fig. 5
Fig. 5
6.
Connect
RED
wire to an accessory (key on) circuit in your vehicle
We suggest tapping wire at pin A7 of radio power/harness (See
Fig. 6
)
Fig. 6
radio connector
7.
Connect
BLACK
wire to ground.
We suggest removing radio chassis screw and securing ground terminal as seen
in
Fig. 7.
Fig. 7
8.
Secure module behind radio cavity and proceed to Pairing.
