PRODUCT SAFETY & DISCLAIMER
READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING, FAILURE TO DO SO MAY CAUSE
PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY
•
This installation guide is provided as a GENERAL installation guide, some vehicles vary and
may require additional steps. We do not accept responsibility for third party labor charges
or modifications. Exercise due-diligence when installing this product.
•
We do not accept any responsibility for vehicle damage or personal injury resulting from
the installation of this product.
•
Careless installation and operation can result in equipment damage
.
Requirements:
XM tuner module or remote cd changer or RSE
Introduction
Many GM owners will be pleased to know they are now able to add Bluetooth
music streaming features without changing the original radio. The A2D-GM3
Bluetooth receiver works in
select 2003-09 Class II Radios with
External 6/
10 or 12-disc CD changer** and/or an XM Tuner module (with or without
subscription) or RSE (Rear Seat Entertainment)
- vehicle must have at
least one factory option which remains connected and functional.
Note: The 6-disc changer built-into the AM/FM radio is internal not external or
remote.
A Bluetooth wireless connection means no wires, clutter or complicated setup.
All user has to do is connect adapter (to radio), pair Smartphone or Tablet and
enjoy GPS, Music, and other important applications on the car system.
See Frequently Asked question
at the end of this guide for details.
Installation
–
to radio
1.
Remove radio from dashboard to gain access to connectors. (Vehicle
specific radio removal instructions are not part of this guide, but
available upon request)
2.
Press 12-pin plug release tabs to disconnect plug from radio (See
Fig. 1
)
Fig. 1
3.
Connect factory 12-pin plug (removed in step 2), to 12-pin gray
connector on harness (See
Fig. 2)
Fig.2
Installation harness
