PRODUCT SAFETY & DISCLAIMER
READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING, FAILURE TO DO SO MAY CAUSE
PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY
•
This installation guide is provided as a GENERAL installation guide, some vehicles vary and
may require additional steps. We do not accept responsibility for third party labor charges
or modifications. Exercise due-diligence when installing this product.
•
We do not accept any responsibility for vehicle damage or personal injury resulting from
the installation of this product.
•
Careless installation and operation can result in equipment damage
.
Requirement
Radio with 8-pin CD changer port and CD-C button
Introduction
Many with older cars looking for a simply way to play audio devices without
replacing the radio will be pleased to find this solution. The A2D-CHRY98 adapter
provides a
Wireless music streaming
solution for Smartphone, Kindle, Tablet
with A2DP profile. A wireless connection means no wires, clutter or complicated
setup. The A2D-CHRY98 works in 1999-01 Chrysler radios with
CDC-C button
and connects to radio 8-pin port which guarantees to best possible sound. CD
changer (if present) must be disconnected.
See Frequently Asked question
at the end of this guide for details.
Installation
Radio must be removed from dashboard to gain access to the connectors.
Vehicle specific radio removal is not part of this guide; however, these may be
available upon request.
1.
Disconnect any factory option (e.g., CD changer) from radio
2.
Connect module 8-pin plug (See
Fig. 1
) to radio 8-pin connector (See
Fig. 2
)
Fig. 1
8-pin plug
Fig. 2
3.
Connect/splice/Tap red wire (See
Fig. 3
) to a 12V accessory (switched)
supply in vehicle. 12V accessory or switched supply is available on
radio harness.
Warning:
Avoid connecting 12V accessory wire to battery (always on)
supply.
Fig. 3
4.
Secure module
5.
Proceed to
“
Pairing
”
