DIS Central Unit CU 6005, User Manual

Page: 19 / 39

Danish Interpretation Systems User Manual
Manual 01 18 04438
19
The load is aborted with the Menu button and
accepted with the Enter button. In both cases, the
menu system returns to the Main menu.
Save configuration
If the “Save configuration” item is chosen this
confirmation display is shown:
If the user accepts the save the progress display is
shown:
The display is shown for a few seconds before the
CU returns to the “Main menu”.
Understanding “Save” and “Load”
configuration
When saving the configuration, the setting that has
been done in the various menus in CU 6010, at the
IS 6132 Interpreter Sets and at AO 6008 Audio Unit
will be saved in the ‘Flash’ memory in the CU
6010.
Also the serial number and type of all units
connected to the CU 6010 at the time of saving the
configuration will be saved in the ‘Flash’ memory
in the CU 6010.
When switching on power to the CU 6010 at a later
stage, then the units connected will be compared to
the saved configuration. If some units are not
present, they will be reported as ‘missing’
When ‘loading’ a configuration the last settings,
which has been saved in the ‘Flash’ memory in the
CU 6010 will be re-loaded to the CU 6010, to the
IS 6132 Interpreter Sets and to the AO 6008 Audio
Unit.
When switching the power to the CU 6010 OFF and
then ON, the last saved setting will also be loaded.
Delete configuration
The “Delete configuration” item brings the user to
the Delete configuration confirmation display:
If the user accepts the deletion the progress display
is shown:
The display is shown for a few seconds before the
CU returns to the “Main menu”.
License info menu
Selecting the License info menu displays the
available features enabled by the current license.
The available features are:
•
Max. Conf. units
•
Max. Intp. Channels
•
VOX option
•
Voting option
•
Security option
Menu button or Enter button leaves the screen.
Firmware info menu
By choosing ‘Firmware info’ from the main menu
information about the software version of the
PowerPC and the DSP is shown as well as the
Serial Number of the unit:
This will overwrite the
configuration in flash.
Continue?
Saving...
PPC: 5.3.86
DSP:
1.0.48
Serial No: 111.111.111
This will delete the
configuration in flash.
Continue?
Deleting...