background image

Important Safety Information

WARNING:  

Read and thoroughly understand all instructions 

and safety information before assembling or operating this tiller. 

Failure to do so may cause serious injury or death. Do not allow 

anyone to operate this tiller who has not read this manual. As 

with all power equipment, a tiller can be dangerous if assembled 

or used improperly. Do not operate this tiller if you have doubts or 

questions concerning safe operation. 
Call our customer service department at 

720-287-5182,  

1-877-487-8275, 

 or visit

 

www.dirtyhandtools.com

 if you have any 

questions or concerns about the safe operation of this equipment.

Intended Use

Do Not Use the tiller for any purpose other than tilling garden soil 

for which it was designed. Any other use is unauthorized and may 

result in serious injury or death.

Personal Protective Equipment

When operating this tiller it is essential that you wear safety gear 

including goggles or safety glasses, steel toed shoes and tight fitting 

gloves (no loose cuffs or draw strings). Always wear ear plugs or 

sound deafening headphones to protect against hearing loss when 

operating this tiller. Always wear sturdy footwear. Never wear 

sandals, sneakers or open shoes, and never operate the tiller with 

bare feet. Do not wear loose clothing that might get caught in 

moving parts.

YOUR TILLER IS EQUIPPED WITH A SAFETY 

DEVICE THAT ENABLES YOU TO STOP THE WHEELS 

AND TINES QUICKLY IN AN EMERGENCY. 

Learn how the drive safety control lever operates and how to 

control the tiller at all times. 

Read the entire Operation Manual before using this equipment!

CALIFORNIA PROPOSITION 65 WARNING

Engine exhaust, some of its constituents and certain

product components contain or emit chemicals known to

the state of California to cause cancer and birth defects

or other reproductive harm.

4

!

WARNING

!

DANGER

!

CAUTION

Summary of Contents for 100983





























Reviews: