background image

Important Safety Information

WARNING: Read and understand the complete Operation 

Manual before assembling or using this product! Failure 

to comprehend and comply with warnings, cautions and 

instructions for assembly and operation could result in serious 

injury or death.

Do not permit children to operate this equipment at any time. Do 

not permit others that have not read and understood the complete 

Operation Manual to operate this equipment. Operation of power 

equipment can be dangerous. It is the sole responsibility of the 

operator to understand the assembly and safe operation of this 

product.

Call our customer service department at 720-287-5182,  

1-877-487-8275,  or visit www.dirtyhandtools.com if you have any 

questions or concerns about the safe operation of this equipment.

INTENDED USE

Do Not Use the log splitter for any purpose other than splitting 

wood, for which it was designed. Any other use is unauthorized 

and may result in serious injury or death.

PERSONAL PROTECTIVE EQUIPMENT

When operating this log splitter it is essential that you wear safety 

gear including goggles or safety glasses, steel toed shoes and tight 

fitting gloves (no loose cuffs or draw strings). Always wear ear 

plugs or sound deafening headphones to protect against hearing 

loss when operating this log splitter.

Do Not wear loose clothing or jewelry that can be caught by 

moving parts of the log splitter. Keep clothing and hair away

from all moving parts when operating this log splitter.

4

!

WARNING

!

DANGER

!

CAUTION

Summary of Contents for 100450

















Reviews: