28
4 Filters
Replacing the protective motor filter
G
4.1
Replacing the
protective motor filter
1.
Switch the appliance off and observe the instructions
under
Z
Chapter 3.2, "Switching off and retracting the
power cable"
.
2.
Remove the dust bag,
Z
Chapter 3.5, "Changing the
dust bag", Point 1-2
.
3.
Pull out the protective motor filter (Fig. 21).
4.
Push the new protective motor filter onto the holder.
When doing this, make sure that the pins for the filter
mount fit into the recesses of the filter.
5.
Reinsert the dust bag and close the dust chamber
cover.
4.2
Replacing the blow-out
filter
1.
Switch the appliance off and observe the instructions
under
Z
Chapter 3.2, "Switching off and retracting the
power cable"
.
2.
Open the blow-out filter cover (Fig. 22/2). To do this,
press the lock (Fig. 22/1) and lift out the blow-out filter
cover towards the back.
3.
Remove the filters (Fig. 23/2).
4.
Insert the new filter (Order Number,
Z
Chapter 8,
"Spare parts"
). Make sure that it clicks into place
correctly.
5.
Then reinsert the blow-out filter cover again.
Fig.21
Fig.22
1
2
Fig.23
Swiffy_de.book Seite 28 Samstag, 3. September 2005 2:41 14
