Dirt Devil Service Line: AU: 1300 361 505
NZ: 0800 800 900
dirtdevil.com.au
4
OPERATION
Assemble appliance and adjust accessories to surface
WARNING:
Danger of injury! Only attach the accessory parts when the appliance is not connected
to the power supply.
CAUTION:
Before assembling, make sure that the accessory part suits the surface to be cleaned.
NOTE:
Twist the accessory part when connecting them to the wand or hose so they are securely in place. Ensure that
installed parts are secure by trying to pull them apart.
1. Assemble the appliance and accessory parts depending on the surface you want to vacuum clean (Fig. 1 – 12).
2. Ensure that the auxiliary air regulator is shut (Fig. 2).
3. If you use the telescopic tube (Fig. 3), adjust its length (Fig. 4).
4. If you use the combination floor tool (Fig. 5), using the rocker switch, set it to the floor to be cleaned
(Fig. 6 hard floor, Fig. 7 carpet).
5. Use the mini turbo tool for cleaning pet hair, dirt and dander from furniture and upholstery (Fig. 11).
6. Use the hard floor tool to gently clean wood and delicate floors (Fig. 12).
1
Attach hose to
vacuum cleaner.
2
3
4
Close auxiliary
air regulator.
Connect hose to
telescopic wand.
Telescopic wand
height adjust.