15
5 Correcting malfunctions
Using other nozzles (optional accessories)
G
B. Assembling the nozzle adapter
(less suction performance)
Assembly:
1.
Insert the nozzle adapter (Fig. 6/1) with
the rear section (Fig. 6/2) into the nozzle
protection part and flip it forwards. It clicks
into place.
2.
Insert the suction hose (Fig. 6/3) into the
opening up to the stop point. It clicks
audibly into place.
Removing:
1.
Press the release button (Fig. 6/4) and
remove the hose.
2.
Press the release button (Fig. 6/5) on the
nozzle adapter and remove the nozzle
adapter.
4.2 Using other nozzles (optional
accessories)
You can put the nozzles that are included in
the accessories set onto the suction hose
(Fig. 2/1) and combine them how ever you
like.
Use the optional accessories as follows:
-Insert tube (Fig. 2/2)
Use this to extend the suction hose.
-
Crevice nozzle (Fig. 2/3)
Use this to vacuum dust from hard to
reach places.
-Furniture brush (Fig. 2/6)
Use this to vacuum dust off objects that
have sensitive surfaces (e.g.
cupboards, doors).
5
Correcting malfunctions
Before sending the appliance to Royal
®
Appliance Customer Services, use the
following table to check whether you can
correct the malfunctions yourself.
WARNING:
Switch the hand-held vacuum cleaner off
before assembling or removing the
accessories.
WARNING:
Switch off the appliance before
troubleshooting. Never use a defective
appliance.
Malfunction
Possible cause
Z
Solution
Appliance does
not work
Plug is not plugged in or
the appliance is not
switched on.
Z
Plug in plug and
switch on appliance.
Socket does not carry
any current.
Z
Test the hand-held
vacuum cleaner at
another socket which
you are sure carries
current.
Power cable is
damaged.
Z
Have the cable
replaced by Royal
®
Appliance Customer
Services.
Appliance does
not suck up any
dirt
Dust bag is full or
blocked.
Z
Empty dust bag.
Brush does not
turn
Belt is defective or worn-
out.
Z
Replace belt.
Handy Zip_de.book Seite 15 Dienstag, 23. August 2005 5:47 17
