12
16
HOW TO CLEAN THE SHROUD AND SEPARATOR
1. Hold dirt bin by carry handle and
press release button (A) to empty
dirt bin.
2. Twist umbrella tube anti-clockwise
and pull out of dirt bin. Hold over bin
and shake free of dirt and debris.
To replace shroud and separator, insert
back into dirt bin, align slots and twist
clockwise until tube locks in place.
A
HOW TO REPLACE THE BELT AND BRUSHBAR
CAUTION: To reduce the risk of personal injury - Unplug before cleaning or servicing. Do not
operate vacuum without either the dirt bin or filters in place.
1. Lay the vacuum flat
and flip it to expose the
nozzle base. The base
should lay flat and
face up. Remove the
five screws.
3. Lift and remove the
brushbar. Dispose of the
old belt.
2. Pull and lift the nozzle
guard off.
