31
Unpacking and assembling
GB
Optionally
available are:
-
Turbo brush (Fig. 7/1)
For thoroughly deep cleaning of carpets with the
revolving brush head.
-
Parquet brush (Fig. 7/2)
For vacuuming especially delicate surfaces (e. g.
parquet, laminate) with long, soft bristles.
Proceed as follows to attach the nozzles:
1.
Switch off the vacuum cleaner and pull the plug from the
mains socket.
2.
Remove the nozzle from the telescopic tube (Fig. 8/1).
3.
Attach the desired nozzle to the bottom end of the
telescopic tube (Fig. 8/1) or if necessary directly to the
handle (Fig. 1/6).
4.
If possible, store nozzles not in use on the accessory
holder (Fig. 1/22). Keep the other nozzles safe and
inaccessible to children.
NOTE:
The brush rotating at high speed causes a loud noise
during operation.
WARNING:
Danger of injury! Only attach nozzles when the vacuum
cleaner is not connected to the mains. The appliance
could be switched on by accident.
ATTENTION:
Use only intact nozzles. Damaged nozzles may scratch
or damage surfaces and objects.
ATTENTION:
Using the cylinder vacuum cleaner without a nozzle
attached increases the danger of accidentally sucking in
objects.
Fig. 7
Fig. 8
1
02_Centrixx TS_gb.book Seite 31 Montag, 23. März 2009 3:52 15
