DirekTronik 1x2 Dual Link DVI Distribution Amplifier User Manual Download Page 6

Page: 6 / 7

HARDWARE INSTALLATION

1. Connect the output display to DVI output2

2. Adjust the DIP switch to EDID Learning Mode [ON,ON] (



)

3. Plug out and then plug in the power adapter

4. The power indication LED will start flicking

5. After the EDID Learning is done, LED will stop flicking

CONNECTION DIAGRAM

Broadcasts DVI signal to 2 DVI displays!

1. Switch off all devices, including monitors.

2. Connect to the receivers.

3. Connect a DVI source to the DVI In.

4. Plug in 5V DC power supply unit.

5. Power on the DVI monitors.

6. Power on the DVI source.

Summary of Contents for 1x2 Dual Link DVI Distribution Amplifier

Page 1: ...1x2 Dual Link DVI Distribution Amplifier User Manual rev 120903 Made in Taiwan ...

Page 5: ...P Switch For EDID learning 5 RS232 IN for firmware update and control use 6 Power Signal LED 7 5V DC interlocking power jack connect to 5V 4A interlocking power supply unit DIP Switch 1 Only DVI output 2 can be used to learn EDID Pin 1 Pin 2 EDID feature OFF OFF Default Dual Link Mode OFF ON Default Single Link Mode ON ON EDID Learning Mode ON OFF Reserved Mode ...

Page 6: ...pter 4 The power indication LED will start flicking 5 After the EDID Learning is done LED will stop flicking CONNECTION DIAGRAM Broadcasts DVI signal to 2 DVI displays 1 Switch off all devices including monitors 2 Connect to the receivers 3 Connect a DVI source to the DVI In 4 Plug in 5V DC power supply unit 5 Power on the DVI monitors 6 Power on the DVI source ...