5 of 7
ALL UNITS, CONTINUE WITH THESE INSTRUCTIONS:
Take the IDE cable included with your kit and attach the BLUE connector to the
motherboard. NOTE: Be careful to insert the cable in the proper direction – each
connector on the cable has a notch that aligns to ensure it is not installed upside-down. See
Figure 14. Drape the remainder of the cable over the front of the unit.
Move the TiVo's internal red/yellow/black power connector over the back side of the
TiVo, as shown in Figure 14. You might have to flex or bend the power cable a bit to get
it to stay in place.
Figure 14
10.
INSTALLING THE TWINBREEZE BRACKET INTO THE TIVO AND ATTACHING THE IDE
CABLE
From the front of the unit, hold the bracket in your left hand near
the A/Master drive (being careful not to touch the circuit board of
the drive) and use your right hand to guide the bracket tab (located
near the edge of the B drive) into the center of the metal bracket
base where the old drive bracket had been mounted. Be sure that
the bracket tab is centered under the metal bracket. You can gently
move the white cable under the fan toward the power supply to
keep it from obstructing airflow under the fan, but be careful not to
dislodge it. See Figure 15.
As you slide the bracket tab under the metal bracket, align the
anchor screw hole (located next to the power connector of the
B/Slave drive) so that when you lower the TwinBreeze bracket
down, the anchor screwhole is aligned with the screwhole in the
metal bracket. See Figure 18.
As you lower the bracket down, thread the IDE cable between the
power cable and the fan. Insert the gray IDE connector into the
B/Slave drive. See Figure 17.
Next, connect the black connector of the IDE cable into the
A/Master drive. Again, be sure that the notch in the connector faces
up. You can then tuck the cables under the front lip of the TiVo—
but be careful not to dislodge the white panel ribbon cable. See
Figure 16.
NOTE: BE CAREFUL NOT TO DISLODGE THE FRONT
PANEL RIBBON CABLE. (See Figure 5.)
Figure 15 (above) Right side view
Figure 16 (above) Front/top view
Figure 17 (above) Front/top view
