DirecTV HTL-HD Owner'S Manual Download Page 94

Page: 94 / 121

8. CUSTOMIZATION

8-15. Setting Digital Caption Style

Allows you to customize the caption style to your preference by allowing you to change: Font, Edge

Type, Color, etc.

Note : If the Style setting is “Set By Program” the captions will appear as defined by the program

provider.

To set DTV Caption Style:

Press the

MENU

button on the Remote Control to display the on-screen menu.

Scroll down using “

” on the remote control.

Select the Preference menu by pressing “

”.

Scroll down to DTV Caption Style using “

”.

Move the highlight to the right with “

” to move to the caption style box.

Select each value from Style to Edge Color.

Move the highlight using “

”, and Select a value for each option with “

”.

Press the

MENU

button on the remote control to return to the previous level.

Press the

EXIT

button on the remote control to return to TV viewing.

Summary of Contents for HTL-HD


























































































































Search results

Summary of Contents for HTL-HD

Reviews:

Related manuals for HTL-HD

Brands by name

Popular brands

DirecTV HTL-HD, Owner'S Manual

Search results

Summary of Contents for HTL-HD

Reviews:

Related manuals for HTL-HD

Brands by name

Popular brands