DirecTV DIRECTV Plus R16, User Manual

Page: 112 / 178

112
DIRECTV
®
DVR
USER GUIDE
Frequently Asked Questions
Progress bar freezes while Acquiring Guide Data / Data From Satellite
Solution:
Possible Causes:
Possible Causes:
Solution:
Blue, black, gray or snowy screen
- This may be normal. After five minutes, the screen saver will display. Press any key on the remote to see the progress bar again.
- May happen if your satellite dish isn’t adjusted properly.
While the “Acquiring Guide Data” or “Acquiring Data From Satellite” message is on the screen, progress freezes during download.
- If satellite data acquisition still does not move forward, press the RESET button behind the access panel door on the front of the
DIRECTV DVR and wait for program guide information to be acquired.
Your TV displays a blue, black, gray or snowy screen.
- Check that DIRECTV
®
Receiver and TV are both powered on.
- If snowy screen, make sure your TV is on channel 3 or 4.
- Press TV INPUT on your DIRECTV remote to cycle through the “sources” or pieces of equipment whose signal is displayed on your TV.
TV INPUT must be programmed to work; see Chapter 6, “System Setup, Remote Control” for instructions.
- Your TV and/or your receiver are not powered on.
- The DIRECTV
®
Receiver and most TVs and VCRs let you toggle between different video sources. Your TV may be on a different
input source than what you are trying to view.
- Your TV may not support the selected HD resolution from your receiver.