Locate provided system harness and make all necessary connections shown in pic.
Make sure that all connections are seated properly before re-assembly.
Before re-attaching back plate, you may want to notch out the side as shown below to
make assembly easier. (This is not necessary, but will help with re-assembly) Unplug
harness from factory unit as shown
Back plate should go on with minimal effort. Once in place, locate 4 screws removed in
Step 2, and replace. (Note: if case will not line up correctly please check that you have
removed the OEM clear plastic LCD protector.)
Summary of Contents for Prodigy One NN-SC-1001
