page 14 of 24
SPLIT.CONVERTER Manual - Version 2.0
CHAPTER 3: Installation
This device may operate with only one power supply. To provide power supply
redundancy, it is recommended to connect both PSU 1 and PSU 2 to independent
power supplies with separate fuses.
This device must be connected to the mains using the three-cord power leads
supplied with the system. Only supply the voltages and signals indicated (84 V –
264 V).
Keep any packaging in order to protect the device should it need to be dispatched
for service.
4.
Connect the signal cables for the MADI signals to the device.
5.
Using the power cord provided connect the PSU to a matching power supply.
WARNING
NOTE
6.
Turn on the power switch and check the status of PSUs on the front panel:
TIP
