DirectOut Technologies MADI.BRIDGE, User Manual

Page: 19 / 32

page 19 of 32 MADI.BRIDGE Manual - Version 1.1
CHAPTER 4: Operation
Signal Input / Output
The device is equipped with six BNC coaxial (75 Ω) and two SC optical MADI ports.
BNC OUT / IN
port 1 to 6
2 x BNC socket (coaxial)
OUT: MADI output (64 ch), connect for MADI
output signal here.
IN: MADI input (64 ch), connect MADI input
signal here.
SC OUT / IN
port 7 & 8
2 x SC socket (optical)
OUT: MADI output (64 ch), connect for MADI
output signal here.
IN: MADI input (64 ch), connect MADI input
signal here.
Signal Routing
Each MADI output port is fed by one of the eight input ports. Push buttons for
each port allow to select the output source which is monitored by the individual
segment display.
INPUT
port 1 to 8
Segment display (green) indicates the
input source for the MADI output
.
Values: 1 to 8 = port 1 to 8
0 = no source selected (mute)
The decimal point indicates that the source
selection differs from the selected preset.
SELECTION
port 1 to 8
Push buttons (up / down) to alter the
selection of the input source.
up = increasing value
down = decreasing value
A change will have immediate effect at the
signal output.
The active signal routing is stored in the device and recalled after power cycle.
2
2
1
1