page 43 of 48
ANDIAMO Hardware Guide - Version 1.0
Appendix B - Firmware Update
Appendix B - Firmware Update
Firmware and the system of ANDIAMO can be updated via a browser-based user
interface:
1.
Open your browser and surf <ANDIAMO IP ADDRESS>:8080
2.
Select an ANDIAMO update fi le (.upd) from your fi le system and click
'Upload'.
3.
After the upload is fi nished, an update information page will be displayed.
4.
Click 'Run update' to perform the update
NOTE
After the upate a reboot is required which will interrupt audio transmission for
about 30 seconds.
Leave the page if you don't want to continue with the update.
During the update, status information will be shown on the webpage.
When the update is fi nished, a 'REBOOT' button will be displayed.
Click this button or power-cycle the device to activate the update.
