P a g e
|
7
DSEFO222-22 Rev 2/21
Photo 5
14)
Slide the T-arm shorting bars over the driven element and T-arms. Measuring from the
boom to the inside of the shorting bar, the dimension below is a good starting point; however,
to ensure the minimum SWR at your operating frequency, we recommend using an antenna
analyzer or SWR bridge to obtain the lowest SWR. Note: The ends of the T-arms that extend
past the shorting bars can be bent up toward the driven element, or down away from the
driven element to obtain the best SWR.
