Platform: DBALL2
Firmware:
CHRYSLER4
© 2017 Directed. All rights reserved.
Rev.: 20170818
To enter feature programming routine
-
Turn t
, then
he ignition
.
ON
OFF
-
Within 5 seconds
, press and
the rogramming button
turns
after 3 seconds . Release the
HOLD
LED
ON
p
until the
orange (
)
Programming button.
-
The
to indicate the feature number is 1. After a short delay, the
flashes
rapidly to indicate
LED
LED
will flash green once slowly
red
the current option of feature 1
.
(i.e. 1x green followed by 1x red indicates feature 1 is set to option 1) The flashing sequence will
repeat until
.
a new command is entered
Changing feature options
-
Press the
arm or
disarm button on aftermarket transmitter to change the option of the selected feature.
lock/
unlock/
-
The
flashes
rapidly the number of times equal to the current option number. After a short delay, the
flashes green
LED
LED
red
slowly the number of times to indicate the current feature.
repeat until
.
The flashing sequence will
a new command is entered
Accessing another feature
-
Press and release the programming button a number of times to advance from the current feature to the next desired feature.
-
The
flashes green slowly the number of times equal to the feature number. After a short delay, the
flashes red rapidly to
LED
LED
indicate the current option of the current feature.
repeat until
.
The flashing sequence will
a new command is entered
When the maximum number of features or options is reached, the
will start flashing again from the first feature or
LED
option.
Once a feature is programmed
-
Other features can be programmed.
-
The feature programming can be exited.
Exiting feature programming
-
No activity for 30 seconds; after 30 seconds, the
will turn
orange for 2 seconds to confirm the end of the programming
LED
ON
sequence.
OR
-
Press and
the programming button for 3 seconds. After 3 seconds, the
will turn
orange for 2 seconds to confirm
HOLD
LED
ON
the end of the programming sequence.
Feature Programming
Programming
Button
Page 12
