Directed Xpresskit DBALL-NISS08EU Installation Manual Download Page 10

Page 10

For a period of ONE YEAR from the date of purchase of a Directed Electronics remote start or security product, Directed 
Electronics. (“DIRECTED”) promises to the original purchaser, to repair or replace with a comparable reconditioned piece, the 
security or remote start accessory piece (hereinafter the “Part”), which proves to be defective in workmanship or material 
under normal use, provided the following conditions are met: the Part was purchased from an authorized DIRECTED dealer; 
and the Part is returned to DIRECTED, postage prepaid, along with a clear, legible copy of the receipt or bill of sale bearing the 
following information: consumer’s name, address, telephone number, the authorized licensed dealer’s name and complete 
product and Part description. 

This warranty is nontransferable and is automatically void if the Part has been modified or used in a manner contrary to its 
intended purpose or the Part has been damaged by accident, unreasonable use, neglect, improper service, installation or 
other causes not arising out of defect in materials or construction. 

TO THE MAXIMUM EXTENT ALLOWED BY LAW, EXCEPT AS STATED ABOVE, ALL WARRANTIES, INCLUDING 
BUT  NOT  LIMITED  TO  EXPRESS  WARRANTY,  IMPLIED  WARRANTY,  WARRANTY  OF  MERCHANTABILITY, 
FITNESS  FOR  PARTICULAR  PURPOSE  AND  WARRANTY  OF  NONINFRINGEMENT  OF  INTELLECTUAL 
PROPERTY,  ARE  EXPRESSLY  EXCLUDED;  AND  DIRECTED  NEITHER  ASSUMES  NOR  AUTHORIZES  ANY 
PERSON OR ENTITY TO ASSUME FOR IT ANY DUTY, OBLIGATION OR LIABILITY IN CONNECTION WITH ITS 
PRODUCTS. DIRECTED HEREBY DISCLAIMS AND HAS ABSOLUTELY NO LIABILITY FOR ANY AND ALL ACTS OF 
THIRD  PARTIES  INCLUDING  DEALERS  OR  INSTALLERS.  DIRECTED  IS  NOT  OFFERING A  GUARANTEE  OR 
INSURANCE AGAINST VANDALISM, DAMAGE, OR THEFT OF THE AUTOMOBILE, ITS PARTS OR CONTENTS, 
AND  DIRECTED  HEREBY  DISCLAIMS  ANY  LIABILITY  WHATSOEVER,  INCLUDING  WITHOUT  LIMITATION, 
LIABILITY  FOR  THEFT,  DAMAGE,  OR  VANDALISM.  IN  THE  EVENT  OF  A  CLAIM  OR  A  DISPUTE  INVOLVING 
DIRECTED  OR  ITS  SUBSIDIARY,  THE  PROPER  VENUE  SHALL  BE  SAN  DIEGO  COUNTY  IN  THE  STATE  OF 
CALIFORNIA. CALIFORNIA STATE LAWS AND APPLICABLE FEDERAL LAWS SHALL APPLY AND GOVERN THE 
DISPUTE. THE MAXIMUM RECOVERY UNDER ANY CLAIM AGAINST DIRECTED SHALL BE STRICTLY LIMITED 
TO  THE  AUTHORIZED  DIRECTED  DEALER’S  PURCHASE  PRICE  OF  THE  PART.  DIRECTED  SHALL  NOT  BE 
RESPONSIBLE FOR ANY DAMAGES WHATSOEVER, INCLUDING BUT NOT LIMITED TO, ANY CONSEQUENTIAL 
DAMAGES, INCIDENTAL DAMAGES, DAMAGES FOR THE LOSS OF TIME, LOSS OF EARNINGS, COMMERCIAL 
LOSS,  LOSS  OF  ECONOMIC  OPPORTUNITY  AND  THE  LIKE.  NOTWITHSTANDING  THE  ABOVE,  THE 
MANUFACTURER DOES OFFER A LIMITED WARRANTY TO REPLACE OR REPAIR AT DIRECTED’S OPTION THE 
PART AS DESCRIBED ABOVE.

This warranty only covers Parts sold within the United States of America and Canada. Parts sold outside of the United States of 
America or Canada are sold “AS-IS” and shall have NO WARRANTY, express or implied. Some states do not allow limitations 
on how long an implied warranty will last or the exclusion or limitation of incidental or consequential damages. This warranty 
gives you specific legal rights and you may also have other rights that vary from State to State. DIRECTED does not and has 
not authorized any person or entity to create for it any other obligation, promise, duty or obligation in connection with this Part.
For further details relating to warranty information of Directed products, please visit the support section of  DIRECTED’s 
website at: www.directed.com

920-10012-01 2013-07

This Interface kit / Data Bus Interface part has been tested on the listed vehicles. Other vehicles will be added to the select 
vehicle list upon completion of compatibility testing. Visit website for latest vehicle application guide.  DISCLAIMER: Under no 
circumstances shall the manufacturer or the distributors of the bypass kit / data bus interface part(s) be held   liable for any 
consequential damages sustained in connection with the part(s) installation. The manufacturer and it’s distributors will not, nor 
will they authorize any representative or any other individual to assume obligation or liability in relation to the interface kit / data 
bus interface part(s) other than its replacement. N.B.: Under no circumstances shall the manufacturer and distributors of this 
product be liable for consequential damages sustained in connection with this product and  neither assumes nor authorizes 
any representative or other person to assume for it any obligation or liability other than the replacement of this product only.

Protected by U.S. Patents: 5,719,551; 6,011,460 B1 *; 6,243,004 B1; 6,249,216 B1; 6,275,147 B1; 6,297,731 B1; 6,346,876 
B1; 6,392,534 B1; 6,529,124 B2; 6,696,927 B2; 6,756,885 B1; 6,756,886 B2; 6,771,167 B1; 6,812,829 B1; 6,924,750 B1; 
7,010,402  B1;  7,015,830  B1;  7,031,826  B1;  7,046,126  B1;  7,061,137  B1;  7,068,153  B1;  7,205,679  B1;  Cdn.  Patent: 

Limited One Year Consumer Warranty

Rev.: 20200502

Platform: DBALL2

Firmware: NISS08EU

© 2020 Directed. All rights reserved.

Summary of Contents for Xpresskit DBALL-NISS08EU











Reviews: