Directed XDR G6867T, Install Manual

Page: 2 / 9

2
Product Description
The G6867T control center is compatible with the following modules: DS4
and DS4+.
Control Center LED Button
Mounting the Control Center
Note
Once this replacement control center has been installed, all
remote controls must be paired with your system. See Remote Pair-
ing for details and follow the instructions for your remote control
type.
The control center’s position should be discussed with the vehicle owner prior
to installation since the antenna, with built-in status LED and Valet/Program,
must be visible/accessible to the customer.
The best position to locate the control center is centered high on the front
windshield. It can be mounted vertically or horizontally relative to the wind-
shield. Metallic window tint can also affect range negatively, so this should
be a consideration when determining the mounting location.
After you determine the best mounting location, follow these steps:
Clean the mounting area with a quality glass cleaner or alcohol to remove
any dirt or residue.
Plug the cable into the control center.
Mount the control center with double-sided tape.
Route the cable down the window pillar to the control module and plug the
cable in the control module.