14
© 2016 Directed. All rights reserved.
Battery Information
The remote control* is powered by two 3V, CR2016 batteries. When
the battery begins to weaken, operating range is reduced and the LED
on the remote control dims.
* Some remote controls are powered using a single coin cell battery
(CR-2032), so please verify which type and quantity is used before
replacing.
Replacing the Battery
1. Use a small flat blade (flat-head) screwdriver and
insert
it into the
slot located along the bottom of the remote, near the key ring.
Carefully
pry
open the case.
2.
Remove
the old batteries from the holding clip.
Orient
the new
batteries for the correct polarity and
insert
into the holding clip.
3.
Reposition
the case parts, then snap together by
pressing
firmly
and evenly on the front and back.
Battery Disposal
Directed cares about the environment. If you need to dispose
of the battery, please do so in accordance with your munici-
pal requirements for battery disposal.
Summary of Contents for Python 4105P
Page 5: ......
