Directed MA3 2018 Installation Manual Download Page 33

Quick Reference Guide

List of available commands

Note that the information below is for many Viper, Clifford, Python, Avital and 
Automate models. Icons and commands may differ depending on the model and 
options purchased. Refer to your authorized installation center for more specific 
information.

Button(s)

Actions
Press

 & 

hold

 for 1 second to lock.

Press

 & 

hold

 for 1 second to unlock.

   

*

Press

 & 

hold

 for 1 second to remote start.

 

  *

Press

 & 

hold

 for 5 seconds to activate the trunk release (optional).

* Icon and remote appearance may differ depending on the model purchased.

SmartStart compatible

This system is compatible with Directed SmartStart. For a complete list of supported 
features, please visit www.mysmartstart.com.

What is SmartStart?

Now you can remote start, lock and unlock your car just by pushing a button on your 
mobile device; using the SmartStart App from Directed, the leader in vehicle security 
and remote start. The simple graphical interface gives you control over the following 
features of your installed remote start or security with remote start system: 
•  Lock/Arm
•  Unlock/Disarm
•  Remote Car Starter
•  Trunk Release
•  Panic
•  AUX Channels

Sending commands to your vehicle

Whether you want to remote start the engine, lock/unlock the doors or pop the trunk, 
there are 3 possible ways you can send commands to your vehicle, using the:
•  Factory remote.
•  Aftermarket remote.
•  Directed SmartStart application via your smartphone.

If applicable, you can also start the engine remotely by pressing the Lock button 3 
times quickly on your factory remote.

Vehicle takeover

The vehicle takeover feature is 

not

 available in this firmware. The vehicle engine will 

shut down as soon as a door is opened.

Pit stop/idle mode

1

Stop

 the vehicle in a safe parking spot and 

put

 the 

gear in Park (P).

Put 

gear in 

Park

2

Press

 the Remote Start button on the transmitter.*

The parking lights will flash once to indicate the 
vehicle is now in Pit Stop Mode.

Parking lights flash x1

14:36

Press Remote 

Start button*

&

3

It is safe to 

leave

 the engine running and 

exit

 the 

vehicle with the factory remote in hand.

Note

: We recommend that you always 

lock

 the 

doors of your vehicle when leaving it unattended.

14:36

Exit vehicle 

with remote

* Icon and remote appearance may differ depending on the model purchased.

Directed Digital Solutions MA3

© 2018-03-06 Directed. All rights reserved.

Summary of Contents for MA3 2018



































Reviews: