![Directed FORD9 Manual Download Page 13](http://html1.mh-extra.com/html/directed/ford9/ford9_manual_2506849013.webp)
13
Directed Digital System FORD9
© 2016 Directed. All rights reserved.
Module programming
Refer to "LED diagnostics and troubleshooting" on page 15 for more information and for troubleshooting
purposes.
To connect the module:
1
Please ensure that the vehicle is in a safe location
an cannot move forward during programming. For
vehicles equipped with a manual transmission, make
sure the gearshift lever is in the neutral position.
2
Connect all the harnesses to the Directed Digital
System,
EXCEPT
the white12-pin main power harness.
Connect all but the
white 12-pin harness
3
Connect the white12-pin main power harness, and
wait until the LED turns ON solid red.
Must be connected LAST
&
Solid
4
Make sure that the key blade is inside the vehicle AND
press unlock button on the door and shut the door to
wake up the CAN BUS.
Key inside
the vehicle
5
Remove battery from1st key fob and make sure that the
other key fob is located more than 10 feet away from
vehicle.
Remove battery
from one key fob
Insert a FOB Key
(without battery)
other key fob
more than
10 feet away
Press UNLOCK
(door button)
+
Key port
2
X
2
X
2
X
Remove battery
from one key fob
Insert a FOB Key
(without battery)
other key fob
more than
10 feet away
Press UNLOCK
(door button)
+
Key port
2
X
2
X
2
X
&
6
Insert a key fob (without battery) into the key port.
Remove battery
from one key fob
Insert a FOB Key
(without battery)
other key fob
more than
10 feet away
Press UNLOCK
(door button)
+
Key port
2
X
2
X
2
X
7
Press the Push-to-Start (PTS) button twice to turn the
ignition ON (for some vehicles, press and hold until
the ignition turns ON). The LED flashes green (quickly).
Important:
Do not press the brake pedal.
Do NOT
depress the
brake pedal
PUSH x2
Flashes Green
(Quickly)
&
8
Press the PTS button once more to turn the ignition OFF.
PUSH x1
&
Off
9
Press the Push-to-Start (PTS) button twice to turn the
ignition ON (for some vehicles, press and hold until
the ignition turns ON). The LED flashes orange (slowly).
Important:
Do not press the brake pedal.
Do NOT
depress the
brake pedal
PUSH x2
Flashes Orange
(Slowly)
&
10
Pair remotes (if applicable). For information on how to
pair a specific remote, please refer to its corresponding
owner documentation, which can be found inside the
product packaging of the complete system or on www.
Pair
remotes*