18
© 2016 Directed. All rights reserved.
Fault Condition Examples:
Command
Cause
Reason/Solution
Runtime Rest
Remote Start is OFF.
Only available when Remote Start is ON.
Sensor
Bypass
System is not Armed.
Only available when Remote Start is ON.
Defroster
Remote Start is OFF.
Not configured
for this.
Only available when Remote Start is ON.
Only available when configured for
Defroster control.
Remote Start Faults
For user safety, the system must be properly configured or Remote
Start will not activate. The Remote Start Fault output (
LED ON
and long fault tone) may be caused by any of several configu-
ration issues. Refer to the following table for the command type
and parking light flashes that will identify the possible fault and
solution.
Flashes* Possible Fault
Solution
5
Brake ON
Release Foot Brake.
6
Hood Open
Close Hood.
7
After performing Remote Start
command MTS** not enabled.
Enabled MTS** Mode.
After performingTimer Start
or Smart Start command**.
Check All Solutions.
8
Toggle Switch OFF.
Turn switch ON.
* Refers to the number all parking light flashes.
** Only available on the 4X10/5X10/4X06/5X06.
Summary of Contents for 9656P
Page 27: ......
