11
403.SUBARU1 1.38 2010 Subaru Forester
©2022 VOXX•DEI LLC. All rights reserved.
Module programming
For
Convenience-Only
programming, see next section.
1
The harnesses must be connected in this exact order:
1. Connect the 14-pin.
2. Connect the 12-pin.
3. Connect the 10-pin.
When the LED turns on solid red, proceed with the next step.
2
Turn the key to the ON position.
The LED will flash orange, then green.
3
Start the vehicle by turning the key and wait until the LED flashes orange slowly.
4
When the LED starts flashing orange slowly, turn the ignition OFF, remove the module from
the vehicle and reconnect it to your computer.
The website will automatically recognize that you are moving onto the second phase of the
programming sequence.
5
Click Submit Key2GO Request.
6
When the configuration is completed, reconnect the module.
The LED turns ON solid green for 3 seconds, then turns OFF.
You have successfully completed the module programming sequence.