5
403.CHRYSLER3 4.32 2012 Dodge/Ram Journey (Smart Key)
©2022 VOXX•DEI LLC. All rights reserved.
Pre-installation and application warnings
START
HERE
This section highlights important information for this specific firmware and will assist in pricing accordingly, as
well as bringing awareness to any operational or vehicle limitations.
Compatibilities and Requirements
T-Harness
compatible
THCHD3 Rev. 1 & 2
AU
X
Keys required for
programming
1
Keys required
for operation
0
Vehicle Takeover
Refer to the
Quick Reference Guide
section for more details.
Firmware notes
OEM Touch Screen:
The Comfort Convenience Controls, Heated Seats Activation feature and Rear Window Defogger Activation
feature, will only function if the vehicle is equipped with OEM touchscreen radio package.
Remote Start features
: The following remote start features can be configured via the information display:
• All Locks (must also set during module flashing)
• Driver Priority Locks (must also set during module flashing)
Range Extender Ready (RXT) installations
are only compatible with vehicles equipped with factory-installed remote starter.
Range Extender Ready (RXT)
is used to dramatically increase the factory remote start activation range compared to the factory
transmitter. Refer to the
Quick reference guide
for more information.
The optional Plug & Play
THCHD3 Rev. 1 & 2
T-Harnesses are sold separately
SmartStart Compatible
: SmartStart is equipped with D2D, which means it can be connected to an interface module and used in
Range Extender Ready (RXT) mode without the use of a remote starter. See "Module programming" for more information.
Unless specified otherwise, all connectors are displayed from the wire side, with the exception of the OBDII diagnostic connector.
Refer to the "Vehicle connections" following the installation diagram.
Footnotes
[1]
Hood pin
: The installation of an aftermarket hood pin is only required on vehicles that are not equipped with a factory hood pin or if
not supported in data.