© 2001 Directed Electronics, Inc.
13
■
Disconnect the VCR from the power source
before cleaning.
■
Do not use liquid or aerosol cleaners on or
in the VCR.
■
Use a dry cloth to dust the VCR.
■
Keep the remote control with the VCR and
secure it in such a manner that it is unlike-
ly to be lost or damaged.
■
Keep liquids away from the VCR. A spill on
the VCR can damage the electronics and
cause electric shock or fire.
VIDEO HEAD CLEANING
If poor playback qualities (snow, distortion,
streaking, etc.) develop and persist, the unit’s
videoheads may need cleaning. If necessary,
purchase a head cleaning cassette. Do not clean
the heads excessively.
When using a head cleaning cassette, read all
instructions carefully; incorrect head cleaning
can permanently damage the video heads.
Cleaning and Care
IMPORTANT!
DO NOT INSERT ANY OBJECTS INTO THE CABINET SLOTS; CONTACT WITH A VOLTAGE POINT
INSIDE THE VCR CAN CAUSE DANGEROUS SHOCK OR MAY SHORT OUT PARTS AND CAUSE
FIRE OR ELECTRIC SHOCK.
FORWARD AND REVERSE
PICTURE SEARCH
While in Play mode, press
REW
or
FF
; to resume
normal viewing, press
PLAY
button.
FORWARD AND REVERSE
JET SEARCH
While in Play mode, press and hold
REW
or
FF
;
Jet Search increases the tape speed 7 times if
recorded at SP speed or 21 times for tapes
recorded at SLP speed. To resume normal view-
ing, release the button.
NOTE: While in Forward or Reverse Jet Search, audio
is muted.
STILL AND FRAME ADVANCE
While in Play mode, press
STILL/SLOW
to stop
on a single still frame. Press
STILL/SLOW
again
to advance picture frame by frame. To resume
normal viewing, press
PLAY
.
Note: Using Still mode for more than five minutes
stresses the tape and causes undue stress on the
video heads; the VCR automatically disengages
Still mode after five minutes have elapsed.
SLOW MOTION PLAYBACK
Press
STILL/SLOW
for more than two seconds
for SLOW Motion Playback.
Using Special Features
