3
OTP - One Time Programmed Start
OTP allows the user to program the remote engine starter to start in a preset number of hours.
OTP is a “one time” user programmable start setting which can be preset up to 24 hours in
advance.
To program
!
Press and release button between 1 & 24 (Every press of the button = 1 hour.)
!
Press button and release to confirm.
!
The parking lights will flash the number of times that the was pressed to confirm how
many hours in advance system is programmed to start.
Note
: OTP must be activated each time it is to be used.
To cancel this function:
!
Press and release button 1 time.
!
Then, press this button and release.
!
The parking lights will flash once to indicate the OTP mode is cancelled.
This mode is canceled as soon as either the remote engine starter or key is used to start the
engine.
Note: To be use, the OTP mode must be enabled by dealer/installer at installation.
Cold Weather Start (Optionnal)
The cold weather start mode will start vehicle every 2 or 4 hours for a 24 hours period.
To activate
!
Press button for 4 seconds.
!
The parking lights will flash to confirm the Cold Weather start mode is activated.
!
Once activated, the vehicle will start every 2 or 4 hours for a 24 hours period and run for a
preset runtime. (for a maximum of 6 or 12 times).
!
This mode is canceled as soon as either the remote engine starter or key is used to start the
engine.
Note: Cold Weather Start option must be enabled by dealer/installer. (2 or 4 hour option may be
select.)
To cancel
Press and hold button for 4 seconds. The parking light will flash once to confirm cancellation.
Trunk release (Optionnal)
To open the trunk, press on button for 4 seconds and release. The system will activate trunk
release (If installed.) The parking lights will flash 3 times to confirm.
