AUX
is triggered before the next remote start activation the system will not
remote start.
To drive your vehicle after it has been remote started:
1.
Get in without stepping on the brake.
2. Insert the ignition key and turn it to the ON position.
3. Now, step on the brake.
The remote control will play the remote start shutdown tone.
You have
now taken direct control from the remote start system.
➤
Timer mode
To activate the runtime of the vehicles engine during remote start:
AUX
1. Press the
button two-times and then
AUX
2. The vehicle will confirm with 4 fast parking light flashes.
3. The system will start every 3 hours until canceled by the brake,
hood, or neutral safety shut-down wires. The remote will respond
with the Start and Stop remote start notification during each Start
and Stop of the Vehicle while in Timer mode.
Important! Timer Mode should be used only in open areas. Never
start and run the vehicle in an enclosed space such as a garage or
carport.
AUX
To exit timer mode, Press the
button two-times and then
again.
➤
Turbo timer mode
Turbo timer mode keeps the engine running after arriving at your desti-
nation for a programmable period of 1, 3, 5 or 10 minutes. This allows
the system’s timer to conveniently cool down the turbo after you have
32
© 2008 Directed Electronics. All rights reserved.