5
52
2
© 2005 Directed Electronics—all rights reserved
3.
Download a media player upgrade file from website and save it into the
media player root directory. Double click to run the upgrade file, and select
"Replace all" on pop-up message to replace old files.
4.
Safely disconnect the media player from your computer.
5.
Select Setting from main menu and press
X
/Enter button to enter.
6.
Push the Navigation button left or right to select Info tab.
7.
Push the Navigation button up or down to select Update Firmware.
8.
Push the Navigation button to the right. Message "Confirm? Yes No" will
appear on the display.
9.
Push the Navigation button to the right or left to select Yes and press the
Navigation button in to start to upgrade firmware. Or, select No to cancel upgrade.
10. When firmware upgrade completes, system will restart.
D
Doocckkaabbllee M
Meeddiiaa PPllaayyeerr—
—IInnssttaallllaattiioonn
1.
Be sure the media player is off, ensure power to the OHD console is off, and
that the ignition key is off.
2.
Align the notches in the side of the media player with the tabs in the sides
of the monitor POD mounting area and slide the player into the monitor.
3.
Slide the player towards the LCD screen until the lock/unlock button latches.
N
NO
OTTEE:: Remove the rubber protective cover over the electrical connector at the bot-
tom of the media player before installing in the monitor POD mounting area.
Store the protective cover on the slot provided on the back of the media
player for reinstallation when the media player is unmounted.
N
NO
OTTEE:: If the player doesn’t power up correctly, remove the player (see instructions
below) and then re-install.
