background image

21

©   2 0 0 6   d i r e c t e d   e l e c t r o n i c s

multi-level security arming

Multi-Level Security Arming allows you to select which of the

security system's inputs or sensors will be active and which will

be bypassed at the time that the system is armed. (See the 

Table

of Zones

section of this guide.) Pressing 

again within five

seconds of arming the security system will activate the Multi-

Level Security Arming feature. Each time 

is pressed again, a

different security level is selected. The different security levels

can be selected as follows:

Press 

once: The siren chirps once. The system is armed.

Press 

a second time within five seconds: The parking

lights flash twice. Zone 2 is now bypassed.

Press 

a third time within five seconds: The parking

lights flash three times. Zone 4 is now bypassed.

Press 

a fourth time within five seconds: The parking lights

flash four times. Zone 7 is now bypassed.

Press 

a fifth time within five seconds: The parking

lights flash five times. Zones 2 and 4 are now bypassed.

Press 

a sixth time within five seconds: The parking

lights flash six times. Zones 2 and 7 are now bypassed.

Press 

seven times within five seconds: The parking

lights flash seven times. Zones 4 and 7 are now bypassed.

Press 

eight times within five seconds: The parking lights

flash eight times. All zones except zone 5 are now bypassed.

Summary of Contents for Clifford 12.2X






















































Reviews: